Features:
Ashly WR-1 2 Channel Wall Mount Remote Level Control
Remote control your system from any location. These devices fit in standard wall boxes and use low gauge wire for hook-up. They are available in white and can be covered with a standard decora plate (not included). Labels for these devices can be made with a template (download Word Document Template above). 'e' versions are available to fit standard european wall boxes
WR-1
The WR-1 is an assignable, dual potentiometer remote volume control for the controlled product. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock connector labeled "0 - 5 Volt Remote Level Control".
By connecting a volume control to a specific pin, that pin can be selected in software under to control the level of any combination of inputs or outputs. It is possible to simultaneously select the same input or output channel to multiple remote level control pins.
The level control is "attenuate only" meaning that the maximum setting of the control potentiometer (fully clockwise) results in 0 dB gain of the controlled channel. Windows are provided for user-generated labels.