Features:
Audio-Technica ATW-252 Handheld Wireless System
Audio-Technica’s Freeway® 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, the 200 Series Freeway Wireless Systems are single-channel, fixed-frequency systems available in three VHF frequencies (169.505, 170.245, and 171.905 MHz).
Each 200 Series Freeway Wireless System includes the ATW-R250 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R250 is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R250 also offers volume control along with AF Peak, RF and Power indicator lights.
- Easy operation and clear, natural sound quality
- Reliable performance and durable construction
- Advanced dipole antenna system for extended operating range
- Power, RF, and AF Peak indicators
- Volume control, ¼” output jack and space-saving power supply
- Rugged unidirectional dynamic element on handheld microphone/transmitter
- Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
- Professional locking connector on UniPak® body-pack transmitter
- Available in 7 system configurations
Download Audio-Technica Series 200 Data Info
OVERALL SYSTEM SPECIFICATIONS
| |
| Operating Frequency | VHF high band, 169 MHz to 172 MHz |
| |
| Number of Channels | Fixed channel |
| |
| Frequency Stability | ±0.005% |
| |
| Modulation Mode | FM |
| |
| Maximum Deviation | ±15 kHz |
| |
| Operating Range | 200' typical |
| |
| Operating Temperature Range | 40° F (4° C) to 110° F (43° C) |
| |
| Frequency Response | 80 Hz to 13 kHz |
RECEIVER SPECIFICATIONS
| |
| Receiving System | Non-diversity, single-channel, dual antenna system |
| |
| Image Rejection | 50 dB minimum |
| |
| Signal-to-noise Ratio | 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz |
| |
| Total Harmonic Distortion | <=1% (10 kHz deviation at 1 kHz) |
| |
| Sensitivity | 20 dBµV for 60 dB S/N (IEC-weighted) |
| |
| Audio Output | 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) |
| |
| Output Connector | 1/4" TS ("mono") phone jack |
| |
| Power Supply | 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply |
| |
| Dimensions | 7.48" (190.0 mm) W x
1.65" (42.0 mm) H x
5.12" (130.0 mm) D |
| |
| Net Weight | 11.0 oz (311 g) |
| |
| Accessory Included | Power supply |
| |
HANDHELD TRANSMITTER SPECIFICATIONS
| |
| RF Power Output | 10 mW High position, 2 mW Low position, typical |
| |
| Spurious Emissions | Under federal regulations |
| |
| Dynamic Range | >=90 dB, A-weighted |
| |
| Microphone Element | Dynamic unidirectional |
| |
| Battery | 9V (NEDA type 1604) alkaline, not included |
| |
| Current Consumption | 30 mA typical |
| |
| Battery Life | Approximately 15 hours in High position;
Approximately 20 hours in Low position
(depending on battery type and use pattern) |
| |
| Dimensions | 9.50" (241.3 mm) long,
2.10" (53.3 mm) maximum diameter |
| |
| Net Weight | 12.7 oz (360 g) (without battery) |
| |
| Accessory Included | AT8456a Quiet-Flex™ stand clamp |