Features:
QSC AUDIO OT-600 600W 70-volt autoformer
600W 70-volt autoformer. Adapts low-impedance amplifiers to drive 70-volt lines. Rugged, heavy-duty construction handles up to 600 watts with low insertion loss - (less than 1 dB). Three voltage taps to accommodate any amplifier output voltage from 40 to 50 volts. Also suitable for use as a high-power speaker transformer handling up to 600 watts Can also be used with amplifiers from 55 to 70 volts to drive 100-volt lines at up to 600 watts.
The OT-600 is a heavy-duty step-up autoformer accessory that adapts any power amplifier output with a maximum voltage of approximately 40 to 50 volts to drive a 70-volt distributed line with up to 600 watts. Three voltage taps let you choose the one most appropriate for the amplifier. The OT-600 can also be used to drive a 100-volt line when used with an amplifier with a maximum output level of 55 to 70 volts.
Conversely, the OT-600 can be used as a high-power speaker transformer, driving loudspeakers with up to 600 watts from a 70 volt distributed line.
The OT-600 autoformer is compatible with any amplifier rated at approximately 350 to 650 watts at 4 ohms. It has built-on brackets for convenient mounting on a panel or in an equipment rack.
- Adapts low-impedance amplifiers to drive 70-volt lines
- Rugged, heavy-duty construction handles up to 600 watts
- Low insertion loss—less than 1 dB
- Three voltage taps to accommodate any amplifier output voltage from 40 to 50 volts
- Also suitable for use as a high-power speaker transformer handling up to 600 watts
- Can also be used with amplifiers from 55 to 70 volts to drive 100-volt lines at up to 600 watts
Compatible amplifier models:
- USA 900 and USA 1310
- RMX 1450
- MX 1500a and MX 2000a
- PLX 1602
- PowerLight 1.0HV, PowerLight 1.4, and PowerLight 1.8
- CX 502 and CX 404
- DCA 1622 and DCA 1644
- Any amplifier rated at approximately 350 to 650 watts at 4 ohms
Download QSC OT-600 Data Sheet