Ace Backstag BRK1028BBX, Super Pocket 8" Deep Backbox (with Brackets)

ACE Backstage BRK1028BBX Standard Extra Deep Back Box with Brackets 10.000" W x 8.000" H x 10.000" L

Ace Backstage products are very specialized and come in many configurations. Our in-house specialist is Bill Evans at our Charlotte showroom. We encourage customers to talk with Bill to make sure you are ordering the correct items needed for installs. Please contact Bill and SE Systems at 1-800-662-1312 for advice and help with Ace Backstage Products. Click for Ace Backstage Website

ACE Extra Deep Back Boxes (#BRK1028BBX and #BRK1048BBX) are slightly deeper (8") as compared with Standard #BBX Series Back Boxes (6") and may be used exclusively with ACE Full and Double Wide Stage Pockets. The #BRK1028BBX and #BRK1048BBX Extra Deep Back Boxes are welded 14 gauge steel with a protective cover that is discarded when the pocket body is finally installed. The box and cover have a clear zinc corrosion resistant finish. A 1/2" mounting flange is predrilled to mate with the pocket body flange. The pocket body assembly is 4.5" deep and the extra deep back box is 8" deep providing a 3.5" work clearance in the bottom of the back box (ideal for feed thru or distribution junction).

CLEARANCE VOLUME: Standard Stage Pocket body assemblies are 4.5" deep while the Extra Deep Back Box is 8" deep providing 3.5" work clearance in the bottom of the Extra Deep Back Boxes making them ideal for feed thru or distribution junctions. Clearance volumes for individual Pocket/Extra Deep Back Box assemblies are as follows:

- #BRK1028BBX Back Box with Full Pocket Clearance volume: 338 Cubic Inches

- #BRK1048BBX Back Box with Double Wide Pocket Clearance volume: 613 Cubic Inches

DURABLE CONSTRUCTION: ACE Standard Extra Deep Back Boxes (#BRK8BBX) are made from tough welded 14 gauge steel (.071" thick).

EASY INSTALLATION: ACE Standard Extra Deep Back Boxes are easily installed into the floor or stage in a few steps. First make the cutout in the floor/stage. Second securely brace the Back Box into the floor and be sure to provide support equal to the floor loading requirements accounting for any height offset required for the finished floor. Third attach any standard electrical conduit to the back box on any side via the combination knock outs. Fourth secure Stage Pocket to Back Box using mating screw holes provided on the Stage Pocket flange and the Back Box flange.

DURABLE FINISH: ACE Standard Extra Deep Back Boxes have a clear zinc corrosion resistant finish.

ELECTRICAL KNOCKOUTS: ACE Standard Extra Deep Back Boxes come with standard Electrical Conduit Combination Knockouts. 1/2" 3/4" 1" and 1-1/4" Knock Outs 4 places typical on opposing sides. 1/2" 3/4" 1" and 1-1/4" Knock Outs 2 places typical on one side.

PROTECTIVE COVER: Included with the Extra Deep Back Box(es) is a protective cover with a clear zinc corrosion resistant finish. This cover maintains a clean Back Box until the pocket is finally installed. The protective cover may be discarded after the pocket has been installed.